Q3 2024 Sumco Corp Earnings Presentation Transcript

Author's Avatar
2024-11-12 17:02:37
Summary

    Nov 08, 2024 / NTS GMT
    Presentation
    Nov 08, 2024 / NTS GMT

    =====================
    Corporate Participants
    =====================
    * Takayuki Komori
    Sumco Corp - Investor Relations
    * Mayuki Hashimoto
    Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director
    * Shinichi Kubozoe
    Sumco Corp - Chief Financial Officer, Executive VP, and Representative Director

    =====================
    Conference Call Participants
    =====================
    * Takashi Enomoto
    BofA Global Research - Analyst
    * Takato Watabe
    Morgan Stanley - Analyst
    * Atsushi Ikeda
    Goldman Sachs - Analyst
    * Yu Yoshida
    CLSA - Analyst
    * Go Miyamoto
    SMBC Nikko Securities Inc. - Analyst
    * Yuta Nishiyama
    Citi - Analyst
    * Shigeki Okazaki
    Nomura - Analyst
    * Mikiya Yamada
    Mizuho Securities Co. Ltd - Analyst
    * Editor

    =====================
    Takayuki Komori - Sumco Corp - Investor Relations

    Thank you for your participation today. This is the results briefing for the third quarter of the fiscal year ending December 2024.

    Before starting the presentation, allow me to confirm today's materials, which consists of three items: the brief statement on consolidated financial results for Q3 fiscal 2024, the announcement regarding revision to dividend forecast, and the presentation deck entitled, Results for Q3 Fiscal 2024. This will be a 60-minute briefing, which will end at 5:15 PM.

    Next, a disclaimer. The estimates, expectations, forecasts, and other future information discussed here and shown in today's materials were prepared based on the information available to the company as of today and on certain assumptions and qualifications, including our subjective judgment.

    Actual financial performance or results may differ substantially from the future information contained in this material due to risk factors, including domestic and global economic conditions, trends in the semiconductor market, and foreign exchange rates.

    We will have presentations today from Representative Director, Chairman, and CEO, Mayuki Hashimoto; and Vice President, CFO, Shinichi Kubozoe. Chairman and CEO, Hashimoto, will discuss our forecast and operating environment, to be followed by an explanation of the financial results by CFO Kubozoe. We have set aside time for a Q&A session as well.

    I will now hand over to Chairman Hashimoto

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    I am Chairman Hashimoto. I will start with the overview on slide 5. This is a summary of the results for the third quarter of the fiscal year 2024. Operating profit and ordinary profit for Q3 slightly exceeded our forecast. The JPY2.1 billion overshoot in OP is mostly the result of lower costs and a slower start to depreciation. Sales was largely in line with our expectations.

    Turning to the earnings forecast for Q4 of 2024. Optically, our forecast for sales shows a slight sequential decline. However, Q4 sales will be impacted by periodic maintenance at our main plant in November which will depress sales slightly. Year-end and New Year's holidays will also have an impact.

    We project OP of JPY5 billion, RP of JPY7 billion, and net profit of JPY4 billion. We expect OP to fall significantly but the key contributing factor is the expected sequential increase in depreciation of JPY2.7 billion. We are also factoring in dollar/yen rate of JPY150 and a number of smaller items as well.

    Next slide please. This slide shows shareholder returns, our dividend guidance. We are guiding for an annual dividend per share of JPY21 based on a JPY6 fiscal year-end dividend. This is a dividend payout ratio of 38.9%.

    With regard to dividends, given the nature of our industry, profitability can be volatile. Our aim has been to smooth the trend in DPS where possible by mitigating the cyclicality of the market to a certain degree, raising the payout ratio when profits are higher, but also controlling the payout ratio from the perspective of financial soundness when it trends significantly higher. Unfortunately, however, we are still experiencing volatility.

    Next page, please. Looking at market conditions during Q3, 300-millimeter wafers did bottom out in Q1, and shipments have since been gradually recovering. However, the pace of recovery in 200-millimeter appears to have been very weak. Customers continue to respect LTA prices although we are having to push out delivery timing which impacted volumes.

    On the outlook for Q4, within 300-millimeter, leading edge at design rules of 7-nanometer or finer and HBM use wafers remain strong. However, with the exception of these areas, conditions in the rest of the market are weak. In particular for wafers used for legacy applications, customer utilization levels haven't necessarily been that strong. So inventory has remained high. I will talk about inventories in more detail later, but sales of leading-edge wafers are very strong but there appear to be issues with wafer inventories for legacy applications.

    For 200-millimeter wafers, customer production adjustments are continuing. So conditions particularly for automotive and consumer applications remain weak with shipments at low levels. In terms of prices, LTA prices continue to be respected by customers but the picture for spot prices, especially 200-millimeter, have been mixed. Some geographies have seen prices soften while prices in other regions have remained firm. But overall, the trend in spot prices is weaker.

    On the outlook for semiconductor demand, AI applications will continue to be the driver over the longer term. I expect it will be a solid driver for at least the next two to three years. Demand related to data centers is very strong. Data center demand is mainly concentrated in 7-nanometer and finer design rules for logic and for HBM within DRAM. These two areas are seeing strong demand.

    There is a clear polarization in this area as well with the GAAP between the winners and losers widening. For automotive consumer and industrial applications, however, we have seen a particularly sharp drop off in demand for automotive. I think there has been a significant impact from the decoupling of US and China trade but there has also been a slowdown in EVs in China with reports of large EV graveyards. So conditions are not very good in automotive. I think a recovery will take time.

    In terms of the outlook going forward, Trump has been re-elected President. Visibility is not very good. Of course, he is a businessman. So it may well be his behavior will be determined by whether or not, he can make money. You could take the view that from this standpoint, he might be easier to read than the other candidate. That said, he holds some very strong views and is a unique individual so trying to predict what he might do is very difficult.

    As I said earlier, there are still delays in completing inventory adjustments for legacy applications in 300-millimeter wafers as the pace of recovery is gradual. It appears that wafer inputs are rising but because of the significant wafer inventory, customers seem to be drawing from inventory, so wafer purchase volumes have been slow to rebound. For 200-millimeter and smaller diameter wafers and products are also weak. So I think it will take some time before we see a recovery. A lot of automotive applications use 200-millimeter. Customer utilization levels are down significantly so a recovery will likely take some time.

    Next page, please. This slide shows the wafer trend for 200-millimeter by quarter. As you can see, the market showed an unprecedented drop and has subsequently remained at low levels. Conditions for 200-millimeter are very challenging indeed.

    Next page, please. This is the trend for 300-millimeter. Thanks to AI as a driver of demand overall, we are seeing a recovery. However, AI is the only application where demand is strong. Legacy applications are not necessarily that strong.

    Next slide, please. In the next few slides, we explore what is happening with leading edge logic and silicon wafers.

    Next slide, please. We have tried to depict the expected evolution for leading edge logic and silicon wafers. We defined true leading edge to be 5-nanometer or finer design rules. At this time, the structure is still FinFET as shown here. The power supply wiring is on the surface, so the process is to grind down the gate material on a single wafer to achieve this structure.

    With the nanosheet or GAA gate all around type, which is now being developed, the gate material is wrapped around the wafer on all sides. The key characteristic is that there is power supply wiring on the back side as well. Effectively, this means the use of two wafers. In this approach, the question is, what type of wafer should be used for the second waver. So far, no standard approach has emerged. We are providing many samples as part of customers' exploratory efforts to nail down the specs.

    However, as we get closer to the most advanced design rules, the existing metrics are insufficient. There are many more metrics that are required further elevating the degree of difficulty in fabricating wafers. At the same time, this also creates room for differentiation, but it does mean that wafer fabrication is much more challenging.

    Next slide, please. If we just look at leading edge (technical difficulty), we estimate the CAGR to be 36%. In terms of applications, AI servers account for a significant proportion of the total followed by smartphones and PCs. So effectively, these applications account for the vast majority of leading-edge applications. Automotive accounts for only a very small share.

    Next slide, please. So which are the nodes where growth is strong when we refer to the leading edge? Certainly, 5-nanometer and 3-nanometer are key. 2-nanometer is likely to start next year and see dramatic growth. The transition to GAA is likely to come at 3-nanometer. So we would expect to see strong growth going forward. GAA is currently 400,000 wafers per month, but we expect it to be 800,000 wafers per month in four years' time, effectively growing at a rate of 100,000 wafers every year.

    Next slide, please. This slide shows customer wafer inventory trends. Inventory has come down but more recently, we have seen a pause in the declines. This is because customers have started to slightly increase purchase volumes again which is being mirrored in the inventory trend.

    Next slide, please. When we look more specifically at logic and memory trends, actually trends vary very significantly by company, making impossible to generalize. For instance, there is a logic customer where inventory of leading-edge wafers is virtually zero. But there are also customers where the inventory of wafers for legacy applications is very high. For memory, inventory levels are higher for NAND while DRAM for consumption is good, reflecting market talk. Wafer input has gone up slightly from memory, so we have seen a moderation in the downtrend for inventory.

    Next slide, please. Projecting is very problematic. Up until 2022, there was a strong correlation with our estimate for PPP-GDP. But more recently, we have seen a divergence. At this stage, it is difficult to say whether we might one day get back to tracking PPP-GDP or whether the relationship has broken down.

    I believe that the disruption is a result of decoupling, effectively, geopolitics is having a major impact. China appears to have developed their own capability to fabricate wafers. Quality does not necessarily appear to be very good but there is strong pressure to comply with the Buy China policy.

    Local Chinese chip makers, particularly those with a high degree of state involvement, have little choice but to use made in China wafers. This policy directly competes with the inflow of wafers from the Free World up to this point, but we don't have a lot of clarity on what exactly is going on. However, as China has increased the volume of its home-grown wafers, I think this has resulted in a data black box leading to data mismatches that cannot be explained.

    We are giving a lot of thought to how to address this. Although the majority of wafers produced in China are test wafers based on our investigations, we understand that wafer production is at around 1 million. The key memory player where the state is the majority stakeholder is thought to be consuming 400,000 to 500,000 in domestically produced wafers, almost all is likely to be domestically produced wafers. We are seeing an increase in factors that cloud the overall picture for China.

    This completes my section of the presentation. I will hand over to CFO Kubozoe to talk about details of our Q3 earnings.

    Shinichi Kubozoe - Sumco Corp - Chief Financial Officer, Executive VP, and Representative Director

    I, Kubozoe, will present the earnings for this quarter. Please turn to slide 18. This slide shows the results for this fiscal year up to Q3. As discussed earlier, Q3 results are as shown in the column third from the right. Sales were JPY98.4 billion; OP, JPY9.1 billion; non-operating gains and losses were a negative JPY3.5 billion; and ordinary profit, JPY5.6 billion.

    The negative non-operating loss widened on a sequential basis, but this is due to valuation losses on foreign currency denominated bonds as of the end of the quarter. The yen was slightly stronger at the end of September resulting in valuation losses. This was the main factor for the JPY3.5 billion non-operating loss.

    Profit attributable to owners of the parent was JPY3.6 billion. CapEx on an acceptance basis was JPY43 billion and depreciation was JPY20.2 billion, up roughly JPY2 billion on a QonQ basis.

    The ForEx rate for third quarter was JPY152.6 to the dollar with the average remaining above JPY150 to the dollar, Nine month sales were JPY296.6 billion; OP, JPY29.9 billion; ordinary profit, JPY26 billion; and net profit, JPY16.2 billion. Further down the table, the OPM, EBITDA margin, and ROE for Q3 are as shown on the table.

    Please turn to slide 19. This is the analysis of QonQ and year-on-year changes in operating income. I will start with the sequential analysis for Q3 on the left. Sequentially, Q3 sales fell JPY6.3 billion and operating income fell JPY3.1 billion. The yen strengthened by JPY2.6 versus the Q2 average.

    We show the key elements of the JPY3.1 billion sequential change to OP in the bar chart below. Solid utilization levels meant we were able to generate cost savings. However, as discussed earlier, there was an increase in depreciation of JPY2.2 billion. Sales related variance was impacted by a slight decline in volumes for a negative impact of JPY1.4 billion. The drop in volumes was primarily in smaller diameter wafers. There was also a negative ForEx impact of JPY1.2 billion. The combined negative impact of depreciation in ForEx at JPY3.4 billion was significant in depressing Q3.

    Looking at the year-on-year change for the nine-month results on the right, sales fell JPY24.2 billion and OP dropped JPY31.9 billion. I discussed this in August in reviewing Q2 but the year-on-year negative from sales related variant was very large. This combined with the increase in depreciation meant that despite the positives from costs and ForEx, overall OP fell JPY31.9 billion year on year.

    Next slide, please. Slide 20 shows the balance sheet and cash flow statement. On the balance sheet to the left, cash and time deposits fell JPY44.4 billion versus the end of the previous fiscal year. I will talk about this in more detail in discussing the cash flow statement. There was a significant increase in tangible and intangible assets of JPY105.8 billion from the end of December 2023 rising to JPY668.8 billion as of the end of September. As a result, total assets increased JPY61.6 billion to JPY1.1346 trillion.

    Total liabilities were JPY496.5 billion with interest bearing debt increasing JPY115.4 billion to JPY339.8 billion from the end of the previous fiscal year. We have largely completed our borrowing for Japanese investments but there was a slight increase in borrowings at the Taiwanese subsidiary, pushing up the balance of interest-bearing debt slightly. In addition, we also paid down some debt in Q2 and Q3 for the net increase of JPY115.4 billion.

    Net assets were JPY638.1 billion on the back of an increase in retained earnings but a decline in non-controlling interest. At the bottom of the table, we show a number of metrics. The equity ratio was 51% and the D/E ratio on a gross basis was 0.59 times. The equity ratio declined 2.3% points while the D/E ratio increased by 0.2 times.

    On the cash flow statement to the right, relative to nine-month operating cash flow of JPY53 billion, investment cash flow composed of capital expenditures on an acceptance basis and others on a net basis was an outflow of JPY200.8 billion, resulting in a negative free cash flow of JPY147.6 billion. There was also an outflow of JPY14.6 billion in dividend payments versus an increase in interest bearing debt of $117.9 billion for a net decline in cash and time deposits of JPY44.4 billion.

    As touched upon in discussing the balance sheet, cash and time deposits were down by JPY44.4 billion. Effectively, we are covering our investment outlays through the combination of cash and time deposits and borrowing.

    On page 22, we show our forecast for Q4. With regard to Q4, in the lower part of the table, we show the forex assumption which is JPY150 to the dollar. We project Q4 sales of JPY97 billion, operating income of JPY5 billion, and ordinary income of JPY7 billion. For non-operating income and expenses, we are projecting a positive JPY2 billion. We have factored in a foreign exchange assumption of JPY150 to the dollar which impacts the valuation of foreign currency denominated bonds. Net profit attributable to owners of the parent is expected to be JPY4 billion.

    Depreciation is expected to increase sequentially. We project JPY23 billion for Q4 which is a 2.8 billion QonQ increase. On a full year basis, we are guiding for depreciation of JPY79 billion. OPM and EBITDA margin guidance is shown at the bottom of the table. On a full year basis, we project sales of JPY393.6 billion, OP of JPY34.9 billion, ordinary profit of JPY33 billion, and net profit of JPY20.2 billion.

    Next slide, please. Slide 23 shows the analysis of change in operating profit. First, the Q4 sequential change on the left. Sales is projected to fall JPY1.4 billion QonQ. OP is forecast to fall JPY4.1 billion.

    Looking at the breakdown of the JPY4.1 billion decline in OP, as you can see down below, the significant factors are the negative impact of an increase in depreciation and the ForEx impact. We are projecting a JPY2.6 appreciation of the yen versus the dollar on a QonQ basis. The combined negative is JPY3.5 billion.

    With regard to sales related variants. As mentioned earlier by Chairman Hashimoto, there will be periodic maintenance at the main plant in Imari, leading to a slight negative but the key factors depressing a P/E by JPY4.1 billion on a QonQ basis are depreciation and ForEx.

    Looking at the analysis of year on year change for the full year forecast. Sales is forecast to fall JPY32 billion and OP, JPY38 billion. Although we expect positive contributions from costs and ForEx, this is not enough to offset the large decline in sales-related variants and the increase in depreciation. Hence, the projection of a JPY38 billion year on year drop in OP. The reference materials show trends for sales, EBITDA margin, and other metrics. Please refer to this at your leisure.

    This completes my section of the presentation,

    Questions and Answers:

    Takayuki Komori - Sumco Corp - Investor Relations

    Thank you. We will now open the floor to questions. We will start with Mr. Enomoto of BofA Securities.

    Takashi Enomoto - BofA Global Research - Analyst

    I would like to ask about slide 16 on the 300-millimeter wafer global capacity and demand forecast. In your explanation, you mentioned that China test wafers were probably around 1 million wafers. If that is indeed the case, then frankly, I don't think we will see a recovery to the red line shown here in terms of the outlook for next year and beyond. Please talk about your view of the outlook for next year onward, taking into account the situation in China. Are you suggesting that since legacy applications are weak, the recovery is likely to slow given the impact of what is happening in China?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Although test wafers account for a large proportion of the China market, there is also a sizable portion which is polished wafers. This is because there is a company which was established as part of an overarching governmental strategy which has strong ties to the state. Companies like this are very proactive in fabricating semiconductor chips. This particular company is fabricating stacked memory. As a result, their wafer consumption is relatively high. Our business with this company has declined substantially. I think the impact of this is very significant.

    In other words, trends in legacy applications for test wafers have significantly diverged from the typical trend to date or in other words, this dotted red line. We used a dotted line because we are not that confident in the forecast. I think there is a possibility that we don't see the kind of recovery as suggested by this graph. That said, there isn't much point in speculating about things we don't understand. We will need to monitor the situation for a while longer.

    However, one thing is clear. Regardless of what happens in China, leading edge will definitely continue to grow strongly on AI-related demand. So although legacy applications cover a broad range of industries including EVs, some of which appear to be doing well, in fact, conditions for some are actually very poor. Without a recovery in this part of the market, I think achieving solid growth over and above consuming the wafers produced in China will be very difficult.

    Our new plants are built to focus only on leading edge. So I would expect these plants to achieve high utilization. However, I am a little concerned that our mature plants could struggle if legacy applications remain persistently weak.

    Takashi Enomoto - BofA Global Research - Analyst

    Understood. Thank you,

    Takayuki Komori - Sumco Corp - Investor Relations

    Next is Mr. Watabe of Morgan Stanley MUFG Securities.

    Takato Watabe - Morgan Stanley - Analyst

    Based on the demand indicated in the charts for 200-millimeter and 300-millimeter on pages 8 and 9, overall wafers appear to have grown by 5% to 6% sequentially in the September quarter. Despite this, SUMCO sales fell 6% in Q3. Although the yen was slightly stronger, the drop in your sales feels a little large. Although this may have been in line with your expectations, how should we interpret these figures?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Where we saw divergence from our forecast was in 200-millimeter. 300-millimeter was virtually in line with expectations. 200-millimeter is difficult to read because we ship to many different customers.

    My sense is that in 200-millimeter, the customers where we have strong relationships were struggling slightly. These were auto-related customers. The number one, two, and three customers, auto related, are very good customers for SUMCO. Conditions that these customers have been widely covered in the press, on the back of this, we struggled slightly with 200-millimeter.

    Takato Watabe - Morgan Stanley - Analyst

    I see. So on this chart, the sequential trend for 200-millimeter appears to be basically flat, but you are saying that SUMCO actually saw significant declines. Is that right?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    So setting aside whether it was significant or not, what I will say is that, frankly, volumes fell below our expectations.

    Takato Watabe - Morgan Stanley - Analyst

    Did 300-millimeter in SUMCO increase in line with the sequential trend indicated in the chart?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    So fortunately for us in 300 millimeter, we are strong in leading edge so we expect to see further growth going forward. The reason why leading edge is not growing now is because the customer is running at full capacity and production is capped. Given this situation, as the customer increases capacity and they are working very hard to achieve this now, I believe the Japanese wafer players will benefit from the incremental increases in volume.

    Takato Watabe - Morgan Stanley - Analyst

    I see. So SUMCO did not see its share of 300-millimeter decline. Is that right?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Our share in 300-millimeter has not fallen.

    Takato Watabe - Morgan Stanley - Analyst

    Thank you.

    Takayuki Komori - Sumco Corp - Investor Relations

    Next is Mr. Ikeda of Goldman Sachs Securities.

    Atsushi Ikeda - Goldman Sachs - Analyst

    I want to ask about the outlook for leading-edge logic demand as shown on page 13 and how SUMCO is positioned. I believe your share of leading-edge logic has been around 60%. However, for 3-nanometer and finer design rules, your Japanese competitor has been very proactive in pursuing business. With regard to this situation, particularly, as the technology transitions to 2-nanometer GAA, can you comment on issues such as initiatives on crystal alignment, the response of your customers, or backside power supply?

    Earlier, you indicated that there are still areas that are unclear but please talk about the outlook for business opportunities? Also, on HBM-used wafers, I believe that given your customer base, you haven't had much success in winning business here. But please talk about the impact that AI servers will have on your earnings including your initiatives in leading-edge DRAM.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    First of all, on HBM, we are supplying wafers for HBM. We have been able to develop relatively good wafers and customer response has been good, so I have expectations for this area.

    For leading-edge logic, regardless of where we go, we are in competition with our Japanese peer. It continues to be the case that the two Japanese wafer players account for almost 100% of the market, maintaining a high share. However, there are differences in our areas of strength. Our peer has relative strength in polished wafers, particularly in fabricating large volumes of the same wafer backed by their very strong capability in production technology. SUMCO's strength reflecting its background as the combination of three companies is in its diversity. This diversity allows us to think outside of the box which contributes to our strength in leading-edge logic. We are particularly focused on this area. So effectively, the two companies have been able to coexist.

    Atsushi Ikeda - Goldman Sachs - Analyst

    Assuming that the market will grow by around 600,000 wafers from 2023 to 2027. Is it your expectation that SUMCO will take more than 300,000 wafers based on a market share of slightly less than 60%.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Yes, that is my view.

    Atsushi Ikeda - Goldman Sachs - Analyst

    With regard to GAA, do you believe that SUMCO is in a very good position?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    So what is challenging for GAA is 110, not 100. All 100 of the customers are struggling with 110. SUMCO has been supplying sample wafers for 110 but although it is very different customers have said they can use some co-wafers. What is a little unclear is whether customers will actually do GAA 110 or not. The timing continues to get pushed out.

    Atsushi Ikeda - Goldman Sachs - Analyst

    Understood. I have been able to confirm the strength of your competitive capabilities. Thank you.

    Takayuki Komori - Sumco Corp - Investor Relations

    Next is Mr. Yoshida of CLSA Securities.

    Yu Yoshida - CLSA - Analyst

    Please refresh my memory on how you are thinking about CapEx for this year. If possible, can you also comment on how you're thinking about next year as well? Also, you have provided a figure for annual depreciation, but can you comment on how to think about this going into the next year?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    For CapEx, we have already completed the capacity expansion. In terms of making payments, we are now at a stage where what is left is the inspection and acceptance process. At this time, I have no intention to undertake new CapEx. That said, I do think it will be necessary to invest to modernize our plants that currently produce for legacy applications.

    CFO Kubozoe, do you have any other comments?

    Shinichi Kubozoe - Sumco Corp - Chief Financial Officer, Executive VP, and Representative Director

    We project depreciation for this year to be JPY79 billion. I commented on next year's outlook at our last results briefing, but given the rapidly changing market conditions, we are still in the process of thoroughly reviewing the ramp up plan and the pace and schedule for the ramp up. Consequently, I think the numbers could change again. The number discussed last time was large, but I think that the number could well end up being lower,

    Yu Yoshida - CLSA - Analyst

    Thank you. Does that mean that you will be restricting CapEx next year? Previously, you had indicated that even if new facilities are not operational, you would still need to start depreciation as a non-operating expense. But would a lower amount mean that there may be some negotiating room with your auditors?

    Shinichi Kubozoe - Sumco Corp - Chief Financial Officer, Executive VP, and Representative Director

    The current situation is that we are in the process of reviewing schedules for facilities and considering a number of different factors in trying to determine ramp up timing. This is not related to next year's CapEx as referred to earlier.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    On the point about depreciation, it is true that once facilities have been completed, under Japanese accounting practice, we are required to take depreciation even if the facilities are not operational. This is a conservative approach which errs on the side of soundness. The situation may be slightly different overseas. Our competitors may be able to suddenly stop the process and carry non-operational facilities, but we are erring on the side of financial soundness in choosing to initiate depreciation.

    That said, in a situation where the facilities have not been ramped up and where we couldn't sell product even if the facilities were operational, we are doing a number of things such as focusing on pushing out delivery timing of facilities as much as possible, delaying the inspection process, or negotiating with our vendors to give us a little more time. So we are working on reducing depreciation from the level that was previously mentioned by CFO Kubozoe.

    However, from the standpoint of financial soundness, even for facilities that have not been ramped up, once we have completed the acceptance process, depreciation will kick in even if the facilities are not operational. That is unchanged from the last time we talked about

    Yu Yoshida - CLSA - Analyst

    Understood. Thank you.

    Takayuki Komori - Sumco Corp - Investor Relations

    Next is Mr. Miyamoto of SMBC Nikko Securities.

    Go Miyamoto - SMBC Nikko Securities Inc. - Analyst

    I have a question about the 300-millimeter wafer demand outlook based on pages 7 and 14. On page 7, you commented on the market environment for Q4 saying that you expect the recovery in overall shipment volumes to be delayed. Can you comment on whether you expect shipment volumes to be up or down sequentially? Also, can you comment on the outlook beyond Q4 by quarter?

    Related to this, on page 14, I believe the graph shows that customer inventory volumes at the end of September were largely unchanged from the end of June. Your competitor has said they expect a slight intensifying of the inventory adjustment in the December quarter. Do you expect the December quarter to be depressed by inventory adjustments? If you are assuming that there will be an inventory adjustment in the quarter, when do you think it will finish? I realize it is very difficult to predict but I would like to hear your view to the extent possible.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Frankly, I don't have a crystal ball. However, it is certainly true that it is increasingly difficult to read the future as a result of decoupling and other factors. I think that the Q4 correction our peer is referring to is related to automotive applications. We also have a lot of exposure to automotive, but it has already been factored in to a certain extent. We are not assuming that there will be a sudden correction in particular to 300-millimeter in Q4.

    However, next year, although it is difficult to say with a high degree of certainty, we do have a sense for logic. For polished wafer, we do have some commitments but who knows. In particular, it is hard to forecast for NAND within memory although I think HBM will be strong. It is slightly more challenging to get a read of the domestic situation. For now, we do have forecasts for 2025 and feel that 2025 is likely to be slightly better than 2024.

    That said, the pace of recovery is very slow. I have been in this industry for a very long time but have been trying to figure out why it is so slow. I believe that China is the reason why our forecasts have diversed so much. When I have looked into it, it seems to be true. China is fabricating wafers, particularly wafers that are easier to make, which is having an impact on legacy applications in my view. There is no impact at all on leading-edge wafers, but I suspect there is a significant impact on legacy applications, particularly test wafers.

    In terms of when we see a recovery, I think it will be different by industry. For leading-edge, AI demand will likely remain strong. Logic and memory for smartphone and PC applications have bottomed and should start to show a gradual recovery. On the other hand, automotive has become very depressed. However, even so, there are some companies that are doing well. I plan to visit and ask a lot of questions. Analog-related is strong, but IGBT is very weak. Customers that have been very strong in the automotive area, which includes Japanese players, appear to be struggling significantly.

    That's the overall picture. I do think that automotive will definitely recover sometime in the next two to three years, but this area is a factor for uncertainty now. 300-millimeter, leading-edge, and AI applications are showing solid growth, so it is a question of when the customer can increase production capacity. We understand that they are doing a lot, but it will hinge on their progress.

    Go Miyamoto - SMBC Nikko Securities Inc. - Analyst

    Thank you. Do you think overall industry demand for the December quarter will increase or decline sequentially from the 750,000 waivers per month of the September quarter?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    I think it will be flat to 1Q.

    Go Miyamoto - SMBC Nikko Securities Inc. - Analyst

    Understood. Thank you,

    Takayuki Komori - Sumco Corp - Investor Relations

    Next is Mr. Nishiyama of Citigroup Securities.

    Yuta Nishiyama - Citi - Analyst

    I want to ask about product mix. I believe there is a polarization in demand between leading-edge and others. How much of SUMCO's production and shipments is leading-edge where supply demand is tight? Also, I believe that an increase in proportion of leading-edge wafers should generate benefits from the mix improvement but are you seeing this have an impact on earnings? Please comment.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    The change in the product chair is not large enough to have an impact on the bottom line yet. However, leading edge accounts for close to 20% for SUMCO. The price point for leading-edge is high and I expect the proportion of leading-edge will increase going forward. We are currently implementing many measures to increase the volume of leading-edge wafers. An improved product mix is favorable for us, and we are doing many things to make this happen.

    Yuta Nishiyama - Citi - Analyst

    I see. Thank you. Can I confirm that leading edge is 20% at SUMCO and that supply demand for leading edge is already tight?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Yes,

    Yuta Nishiyama - Citi - Analyst

    Understood. Thank you

    Takayuki Komori - Sumco Corp - Investor Relations

    Next is Mr. Okazaki of Nomura Securities.

    Shigeki Okazaki - Nomura - Analyst

    Earlier, CFO Kubozoe indicated that depreciation for this fiscal year is projected to be slightly less than JPY80 billion. Three months ago, you indicated that 2025 would be around JPY150 billion. So does this mean that even if we're able to limit depreciation slightly, SUMCO will still see a significant increase in costs? The full year guidance for this year's ordinary profit is JPY30 billion. So although it will depend on next year's demand, it seems earnings will be very challenging next year. Please provide some color about measures that you are already considering to mitigate the impact of a deterioration in earnings next year.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Earlier, I said that it appears that the recovery has been slow in picking up. We are considering many different initiatives. We are considering many things including the reallocation of human resources.

    Shigeki Okazaki - Nomura - Analyst

    When you say slow to pick up, I couldn't quite catch what you said.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    The recovery in legacy applications has been surprisingly slow. At this stage, we don't know whether it is a slow recovery or in fact that it won't be a recovery. In the past, market recoveries had tended to be across the board with all of the market moving in sync either up or down. Recently, as you know, we are seeing a clear polarization between individual customers which makes it difficult to make projections. The customers doing legacy applications appear to be really struggling. Leading-edge customers continue to hit new record highs. So it may be that the reason why the recovery and legacy is weak is because leading-edge is replacing legacy.

    In terms of measures, as an example, there is no need to allocate a lot of human resources to areas where volumes are falling. There are many things we can do like reallocating those human resources to the leading-edge. Also, for areas of the market that are clearly in decline, we must consider many things.

    Shigeki Okazaki - Nomura - Analyst

    You are talking in broad terms about initiatives like [radicalization], cost reduction but to a greater degree than normal, is that the right way to understand your comments?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    We are considering measures that exceed typical measures.

    Shigeki Okazaki - Nomura - Analyst

    Thank you,

    Takayuki Komori - Sumco Corp - Investor Relations

    Next is Mr. Yamada of Mizuho Securities.

    Mikiya Yamada - Mizuho Securities Co. Ltd - Analyst

    First of all, I would like to confirm that the 20% that is leading-edge refers to volume rather than sales. Is that correct?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    Yes, that's on a volume basis.

    Mikiya Yamada - Mizuho Securities Co. Ltd - Analyst

    Got it. Given that it is based on volume, if we look at the sequential change in quarterly OP for Q3, while sales dropped JPY6.3 billion, sales-related variance was a negative of only JPY1.4 billion. Can we interpret this to be an improvement in mix? Or is this a reflection of the positive contribution to unit prices as a result of the LTAs? Also for Q4, do you expect a similar situation as well?

    In addition, I believe you will have new facilities coming online that are dedicated to the fabrication of leading-edge wafers. Given that demand for leading-edge is tight, can we assume that the probability of ramping up these facilities is high?

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    That's a very good question. And yes, you are correct on the first point. The proportion of leading-edge is rising. Also, the price point for leading-edge is high to begin with and we have also seen a slight increase in prices, so there has been an improvement. You are also correct on the second point as well. Fabricating leading-edge wafers really needs to be at the new plant. So I think we could have a situation in future where the new plant runs at full capacity, but we have idle capacity at the older plants.

    In anticipation of this, I want to modernize our facilities. Although we have significantly tightened our CapEx budget, I still want to ensure that we invest to modernize existing facilities within the more limited budget. In replacing the facilities, we will need to first make investments to accommodate the larger form factor for the new facilities, including renovating the physical shell and interiors as well as re-engineering utilities.

    This type of investment does not require several hundreds of billions of yen. We can do a lot of this type of work with investments of JPY10 billion or less. It would be challenging to do this for 3- or 2-nanometer but we are looking at different ways of allocating capacity. Potentially, we could use the modernized facilities to do 7- or 5-nanometer while using the new facilities for the more challenging leading-edge wafers.

    Mikiya Yamada - Mizuho Securities Co. Ltd - Analyst

    Understood. Thank you. Previously, you had said that even in tough times, your aim was to generate an EBIDTDA margin in the low 30s. With the measures you have just described as well as initiatives for 200-millimeter, I would hope you can make progress given it is only a few more percentage points.

    Mayuki Hashimoto - Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director

    We will do our best. Please continue to support us,

    Mikiya Yamada - Mizuho Securities Co. Ltd - Analyst

    Understood. Thank you.

    Takayuki Komori - Sumco Corp - Investor Relations

    Mr. Yamada. Thank you. We will end the meeting here. Thank you to everyone for joining the Q3 fiscal 2024 results briefing. We are grateful for your participation today.

    Editor

    Statements in English on this transcript were spoken by an interpreter present on the live call. The interpreter was provided by the company sponsoring this event.

    Call participants:

    Corporate Participants

    Takayuki Komori, Sumco Corp - Investor Relations
    Mayuki Hashimoto, Sumco Corp - Chairman of the Board, Chairman of the Board of Directors, Chief Executive Officer, Representative Director
    Shinichi Kubozoe, Sumco Corp - Chief Financial Officer, Executive VP, and Representative Director

    Conference Call Participants

    Takashi Enomoto, BofA Global Research - Analyst
    Takato Watabe, Morgan Stanley - Analyst
    Atsushi Ikeda, Goldman Sachs - Analyst
    Yu Yoshida, CLSA - Analyst
    Go Miyamoto, SMBC Nikko Securities Inc. - Analyst
    Yuta Nishiyama, Citi - Analyst
    Shigeki Okazaki, Nomura - Analyst
    Mikiya Yamada, Mizuho Securities Co. Ltd - Analyst
    * Editor

    Refinitiv StreetEvents Transcript
    Q3 2024 Sumco Corp Earnings Presentation
    Nov 08, 2024 / NTS GMT

    Disclosures

    Click for the complete disclosure